Recommended for a system which has moderate usage and/or is serviced on a regular basis, every 1–2 years. Trained GC Heating and Cooling technicians will perform a 35-45 minute tune-up and professional cleaning including the following 25 procedures:
 

1. Blower Motor- measure amperage and voltage for proper operation

2. Check blower wheel for proper balance, clean blower wheel

3. Thermostat – test for proper operation, check for proper location (replacements available for purchase)

4. Check, Cleaning existing air filter (as needed) (replacements available for purchase)

5. Check for proper draining –  pan and drain line

6. Bearings – inspect for wear

7. Check and confirm proper return air and size

8. Inspect condenser chassis and remove debris

9. Wash outdoor condenser coils w/ lite chemical cleaner

10. Refrigerant – check for proper charge and monitor operating pressures (refrigerant available for purchase)

11. Safety Devices – inspect for proper operation

12. Electrical Disconnect Box – inspect for proper rating and safe installation

13. Electrical Wiring – inspect and tighten connections

14. Test/inspect contactors for burned, pitted contacts

15. Inspect electrical for exposed wiring

16. Inspect and test capacitors (capacitors available for purchase)

17. Inspect fan blade (clean if necessary)

18. Inspect service valves for proper operation, check for locking caps (caps available for Purchase)

19. Measure Supply/Return temperature differential

20. Compressor – monitor, measure amperage and volt draw, check wiring connections

21. Check unit for time delay relay

22. Check condition of isolation pads/grommets (pads and grommets available for purchase)

23. Inspect suction line for proper fittings

24. Inspect all fittings for signs of oil and/or leakage

25. Check the condition of Blower Belt, if applicable (belt available for purchase)

Recommended for a system which has extended usage and/or is serviced on a irregular basis, every 2 – 4+ years. Trained GC Heating and Cooling technicians will perform a 45-80 minute tune-up and professional cleaning including the following 28 procedures:
 

1. Blower Motor- measure amperage and voltage for proper operation

2. Check blower wheel for proper balance, clean blower wheel

3. Thermostat – test for proper operation, calibrate, and level

4. Cleaning existing air filter (as needed) (replacements available for purchase)

5. Bearings – inspect for wear and lubricate(if necessary)

6. Check for proper draining – drain pan and drain line, clean( if necessary) and treat with algae treatment

7. Access, Inspect & chemical wash indoor evaporator coil

8. Confirm proper return air and size

9. Inspect condenser chassis and remove debris

10. Wash outdoor condenser coils w/ heavy duty chemical cleaner

11. Refrigerant – check for proper charge and monitor operating pressures (refrigerant available for purchase)

12. Safety Devices – inspect for proper operation

13. Electrical Disconnect Box – inspect for proper rating and safe installation

14. Electrical Wiring – inspect and tighten connections

15. Test/inspect contactors for burned, pitted contacts

16. Inspect electrical for exposed wiring

17. Inspect and test capacitors (capacitors available for purchase)

18. Inspect fan blade (clean if necessary)

19. Inspect service valves for proper operation,check for locking caps (caps available for Purchase)

20. Measure Supply/Return temperature differential

21. Measure for proper air flow volume

22. Compressor – monitor, measure amperage and volt draw, check wiring connections

23. Check unit for time delay relay

24. Check condition of isolation pads/grommets (pads and grommets available for purchase)

25. Inspect suction line for proper fittings

26. Inspect all fittings for signs of oil and/or leakage

27. Check the condition of Blower Belt, if applicable (belt available for purchase)

28. Duct system – inspect for air leaks (air leak repair available for purchase)

Recommended for a system which has regular usage and/or is serviced on a regular basis, every 1 – 2 years.